Sound - Sony BRAVIA KLV-40EX430 Operating Instructions Manual

Sound

Sound Mode
Reset
7 Band Equalizer
Balance
Intelligent Volume
Volume Offset
Surround
Bass Booster
Dual Sound
Speakers
Audio Out
HDMI/DVI Audio
Source
(only in HDMI 1
input mode)
16
GB
Sets a sound mode. The options that can be selected differ depending on the
"Scene Select" settings.
Resets all the "Sound" settings except "Sound Mode", "Dual Sound", "Speakers",
"Audio Out" and "HDMI/DVI Audio Source" to the factory settings.
Adjusts sound frequency settings.
Emphasises left or right speaker balance.
Minimizes the difference in volume level between all programmes and adverts
(e.g. adverts tend to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs.
Selects the suitable surround effects depending on the genre of TV programme
(movie, sport, music, etc.) or video game.
Produces a fuller sound for more impact, by emphasising the bass sounds.
"Stereo"/"Mono": For stereo broadcasts.
"Main"/"Sub"/"Mono": For bilingual broadcasts, select "Main" for sound
channel 1, "Sub" for sound channel 2, or "Mono" for mono channel, if available.
~ • If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The
sound becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot listen to stereo broadcast sound when "Mono" is selected.
z • If you select other equipment connected to the TV, set "Dual Sound" to "Stereo",
"Main" or "Sub". However, when the external equipment connected to the HDMI jack
(except HDMI 1) is selected, this is fixed to "Stereo".
• If you access to FM Radio mode, set "Dual Sound" to "Stereo" or "Mono".
Selects sound output from TV speakers or external audio equipment.
You can also turn on the connected equipment that is compatible with BRAVIA
Sync Control, after making the appropriate settings of BRAVIA Sync Control.
"Variable": When using an external audio system, volume output from audio out
can be controlled using the TV's remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume
control to adjust the volume (and other audio settings) through your audio system.
Switches the audio signal for HDMI input when a DVI device is connected. Select
from "Auto", "HDMI Audio" and "PC Audio".