Voltage Regulation - Tripp Lite OMNIVS1000 Specification

Battery Access
Battery replacement
description

VOLTAGE REGULATION

Voltage regulation
description
Undervoltage correction
LEDS ALARMS & SWITCHES
LED Indicators
Alarms
Alarm cancel operation
Switches
SURGE / NOISE SUPPRESSION
UPS AC suppression joule
rating
UPS AC suppression
response time
UPS Dataline suppression
EMI / RFI AC noise
suppression
PHYSICAL
Installation form factors
supported with included
accessories
Installation form factors
supported with optional
accessories
Primary form factor
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / inches)
UPS / Power Module
dimensions in primary form
factor (height x width x
depth / cm)
UPS / Power Module weight
(lbs)
UPS / Power Module weight
(kg)
UPS Shipping dimensions
(height x width x depth /
inches)
UPS Shipping dimensions
(height x width x depth / cm)
Shipping weight (lbs)
Battery access door
Hot-swappable, user replaceable batteries
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 89
Input voltages between 89 and 105 are boosted by 14%
4 LEDs indicate line power, battery power, overload and battery low/replace status
Audible alarm indicates power-failure and low-battery conditions
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
2 Switches control off/on power status and alarm-cancel/self-test operation
510
Instantaneous
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet
Yes
Tower
Wallmount (UPSWM - tower mounting kit)
Tower
10.8 x 5.2 x 7.5
27.3 x 13.3 x 19
18.4
8.4
14 x 8.5 x 11
35.6 x 21.6 x 27.9
19.9