Tripp Lite PowerVerter APS750 Specification

Model #: APS750
PowerVerter® APS 750W Inverter/Charger with Auto-Transfer Switching and 2 Outlets
Description
Tripp Lite's APS750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a
standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or
automotive DC source. OverPower™ inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and
DoubleBoost™ inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold
start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected
equipment and the battery set is recharged via 3 stage, 20 amp charging system. In UPS mode, the APS system responds to blackouts and voltage
fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple
installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during
battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current
needs on start-up. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and
continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries
connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable
line to battery power transfer voltages.
Applications
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion vans and
fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export applications and as an uninterruptible power
supply (UPS) for items compatible with a 16.6 millisecond transfer time. NOTE: For sump pump applications, Tripp Lite recommends its "UT" Utility
Truck Inverter/Chargers.
Package Includes
APS750 Inverter/Charger
Instruction manual with warranty information
Features
APS750 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for
equipment compatible with a one cycle transfer time
Highlights
12V DC or 120V AC input; 120V AC output; 2 outlets
750 watts continuous, 1125 watts OverPower™ and 1500 watts
DoubleBoost™ inverter output
3 stage, 20 amp selectable wet/dry cell battery charger
Auto Transfer Switching option for battery backup / UPS operation
Reliability enhanced large-transformer design with protected DC wiring
terminals
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com