Samsung MH026FNCA Service Manual page 48

No Parts
2 Fan 1) Loosen the fixing nut and detach the Fan.
& (Use Monkey Spanner.)
Motor
2) Loosen 4 fixing bolts and detach the
Motor. (Use +Screw Driver.)
3) Loosen 4 fixing bolts and detach the
Bracket Motor. (Use +Screw Driver.)
3 Heat Exchanger 1) Release the refrigerant at first.
& 2) Disassemble the Inlet and Outlet Pipe by
Compressor welding.
3) Loosen the fixing screw of the
Heat Exchanger. (Use +Screw Driver.)
4) Detach the Heat Exchanger.
5) Loosen 3 nuts of the Compressor.
(Use Monkey Spanner.)
6) Detach the Compressor.
Samsung Electronics
Procedure
Disassembly and Reassembly
Remark
4-23