Download Print this page

GE JKP20, JKP25, JKP28, JKP48, JKP50,JTP20, JTP25, JTP28, JTP48, JTP50 Owner's Manual: Save These Instructions

27" & 30" built-in electric single wall oven.
Hide thumbs

Advertisement

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
WARNING!
SAFETY PRECAUTIONS
s
Pulling out the shelf to the stop-lock is a
convenience in lifting heavy foods. It is
also a precaution against burns from
touching hot surfaces of the door or
oven walls.
s
Do not use the oven to dry newspapers.
If overheated, they can catch on fire.
s
Do not use the oven for a storage area.
Items stored in an oven can ignite.
s
Do not leave paper products, cooking
utensils or food in the oven when not
in use.
COOK MEAT AND POULTRY THOROUGHLY...
Cook meat and poultry thoroughly—meat to at least an INTERNAL temperature of 160°F and poultry
to at least an INTERNAL temperature of 180°F. Cooking to these temperatures usually protects against
foodborne illness.
SELF-CLEANING OVEN
s
Do not clean the door gasket. The door
gasket is essential for a good seal. Care
should be taken not to rub, damage or
move the gasket.
s
Do not use oven cleaners. No commercial
oven cleaner or oven liner protective
coating of any kind should be used in or
around any part of the oven. Residue from
oven cleaners will damage the inside of the
oven when the self-clean cycle is used.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

4
s
After broiling, always take the broiler pan
out of the oven and clean it. Leftover
grease in the broiler pan can catch fire
next time you use the pan.
s
Clean only parts listed in this Owner's
Manual.
s
Do not use aluminum foil to line oven
bottoms, except as suggested in this
manual. Improper installation of
aluminum foil may result in a risk
of electric shock or fire.
s
Before self-cleaning the oven, remove the
broiler pan, grid and other cookware.
s
Be sure to wipe up excess spillage before
starting the self-cleaning operation.
s
If the self-cleaning mode malfunctions,
turn the oven off and disconnect the
power supply. Have it serviced by a
qualified technician.

Advertisement

Troubleshooting

   Also See for GE JKP20, JKP25, JKP28, JKP48, JKP50,JTP20, JTP25, JTP28, JTP48, JTP50

   Related Manuals for GE JKP20, JKP25, JKP28, JKP48, JKP50,JTP20, JTP25, JTP28, JTP48, JTP50

Comments to this Manuals

Symbols: 0
Latest comments: