Table of Contents
Advertisement
4
Connect Digitizer
To the power cord
A. Connect the power cord to the left side of
the digitizer.
B. Plug one end of the power cord into a wall
outlet or other power source.
To the Hi-Speed USB cable
C. Connect one end of the Hi-Speed USB cable to your computer.
D. Connect the other end of the Hi-Speed cable to the digitizer's USB port, locating at the
left side of the digitizer.
E. Turn the power switch at the front-left panel of the
digitizer to "On"; once the scanner is detected by your
system, the LED lights on the front panel will brighten,
and the digitizer is ready to scan.
Power switch
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Medi-7000 and is the answer not in the manual?
Questions and answers