Table of Contents
Advertisement
Once the MSS is installed on your system, the MSS utility
program should appear as an icon on the status bar with a menu
of 4 options (Probe scanners, Launch when PC starts up, About,
and Exit), and the utility program name will be added to the
startup menu of the Microtek ScanWizard Pro folder.
Probe scanners
When this option is selected, scanners connected to the server
are listed in the Probe scanners window, and information related
to the connected local scanners is shown as well.
Launch when PC starts up
When this option is selected, the MSS runs automatically each time Windows is restarted. This option is
enabled by default. To change this option from the default setting, select it once more, and when you start
Windows the next time, the MSS utility will not run and the icon is hidden.
If scanners are already connected to the server and are in the ready state, a "found server" scanner message
displays on the screen when you restart Windows. People on the network will be able to locate shared
scanners from the ScanWizard Pro Scanner menu (by using the TCP/IP Scanner Setup command). If no
scanners are connected to the server, or if no scanners have been found by the system, a "No scanners"
message displays on the screen. To resolve this problem, check to see if your scanner is in the ready state,
or refer to the troubleshooting documentation on the Microtek CD-ROM.
Scanner found
Scanner not found
If Launch when PC starts up is unchecked from the MSS menu, none of the connected local scanners can
be shared for public use. People on the network will not be able to locate shared scanners from the Scanner
menu, even if the specified network scanner server location is given.
About
This option gives you information about the MSS utility program.
Exit
This option lets you exit the MSS utility program. To re-launch the MSS utility program, choose Microtek
Scanner Server from the startup menu of the Microtek ScanWizard Pro folder.
2
Advertisement
Table of Contents
Need help?
Do you have a question about the ScanWizard Pro's and is the answer not in the manual?
Questions and answers