Microtek ScanPotter Reference Manual page 30

The newly added application is displayed immediately in the left-to-right
movable application window. It is now ready to be selected to open your saved
files.
Remove an Existing Application
You are also allowed to remove an application from the application listing
window. To do so, click and highlight the application you wish to remove, and
then click the Minus (-) button at the top right side of the application lists.
Copy Application
Copy application allows you to perform the final scan and send the scanned
image to the specified printer. Also, you can select the proper paper size for the
printed file at this layer.
Please take note that if there is no printer connected with your computer, even
when the Copy application is activated, the options for the setup of printers
cannot be accessed until you connect a printer with your computer.
30 Microtek ScanPotter Reference Manual
The setup options are disabled
when there is no printer
connected with your computer
system