Ap Bridge-Point To Point Mode - Edimax EW-7416APn V2 Manual

Encryption
Authentication
Signal
Mode
Refresh
Connection

2-4-3 AP Bridge-Point to Point Mode

In this mode, this wireless range extender/access point will connect to
another wireless range extender/access point which uses the same mode,
and all wired Ethernet clients of both wireless range extender/access
points will be connected together. You can use this mode to connect a
network to another network which is physically isolated.
Please note that when you set your range extender/access point to this
mode, it will not accept regular wireless clients anymore.
When you select 'AP Bridge-Point to Point', the following options will
be displayed:
Display the encryption setting of the range
extender/access points. If you have selected the
range extender/access point with security setting,
you have to go to '2-7 Wireless Security' to set the
same security with the range extender/access point
you want to associate.
Display the authentication type of the range
extender/access point.
The signal strength of each range extender/access
point will be displayed here. The signal strength is
stronger, the connection quality is better.
Display the wireless modes include 11b, 11b/g or
11b/g/n or 11n only of the range extender/access
points.
Click this button to refresh the table.
Select an range extender/access point and click
this button to choose the network. The SSID name
of the range extender/access point you have
selected will be displayed in the Main SSID in the
Basic Setting page.
31