Control Functions; “Engine Stop” Switch; Shift Pedal; Kick Starter - Yamaha TT-R90(P) Owner's Service Manual

CONTROL FUNCTIONS

EC150000
CONTROL FUNCTIONS
"ENGINE STOP" SWITCH
Make sure that the engine stop switch 1 is
positioned to "
been equipped to ensure safety in an emer-
gency such when the machine is up set or
trouble takes place in the throttle system. The
engine will not start or run when the engine
stop switch is turned to "

SHIFT PEDAL

The gear ratios of the constant-mesh 3 speed
transmission are ideally spaced. The gears
can be shifted by using the shift pedal 1 on
the left side of the engine.
WARNING
When starting out on the machine, shift the
transmission into 1st after pulling in the
front brake lever and closing the throttle
grip.

KICK STARTER

WARNING
Before starting the engine, be sure to shift
the transmission into neutral.
Rotate the kick starter 1 away from the
engine. Push the starter down lightly with your
foot until the gears engage, then kick smoothly
and forcefully to start the engine.
EC155001
THROTTLE GRIP
The throttle grip 1 is located on the right han-
dlebar; it accelerates or decelerates the
engine. For acceleration, turn the grip toward
you; for deceleration, turn it away from you.
1 - 9
GEN
INFO
". The engine stop switch has
".