Kenwood DNX7380BT Instruction Manual page 10

Number Name
fi (Reset)
1
MENU
2
NAV
3
TEL
4
Volume Knob • Pressing switches attenuation of the volume on/off.
5
SCRN
6
Remote
7
Sensor
0 (Eject)
8
Disc insert
9
slot
USB terminal
10
Input jack
11
Release key
12
SD card slot
13
* The display may not switch to the Tone Control screen in some conditions.
• If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.94).
• Displays the Top Menu screen (P.16).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• Displays the Hands Free screen (P.53).
• Pressing for 1 second turns the screen off.
• Turning adjusts volume up or down.
• Pressing for 1 second displays Tone Control screen (P.85).*
• Displays the Screen Control screen.
• Pressing for 1 second displays rear view camera display.
• Receives the remote control signal. You can enable or disable this
feature by Remote Sensor (P.69).
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
A slot to insert a disc media.
A USB terminal for USB storage device and iPod.
An input jack for external device.
Detaches the front panel.
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
Return to the Top page
Basic Operations
Motion
9