Bluetooth Control; Registering And Connecting Bluetooth Unit - Kenwood DNX7380BT Instruction Manual

B
luetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
NOTE
• To use Bluetooth function of DNX5380/
DNX5380M, the optional accessory (KCA-BT300)
is necessary.
About the cell-phone and
Bluetooth audio player
This unit conforms to the following
Bluetooth specifications:
Version
Bluetooth Standard Ver. 2.1 + EDR
Profile
Cell-phone:
HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phonebook Access Profile)
SYNC (Synchronization Profile)
Audio player :
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/.
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.

Registering And Connecting Bluetooth Unit

It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
You can register up to 5 Bluetooth unit.
1
Press the <TEL> button.
Hands Free screen appears.
2
Touch [BT SETUP].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit
• Connecting the Bluetooth unit
Return to the Top page
Bluetooth Operation
(P.54)
(P.54)
53