Initial Setup - Kenwood DNX7380BT Instruction Manual

Initial setup

Perform this setup when you use this unit first time or when you reset the unit (P.94).
1
Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is "British English (en)" for
models with region code 2/3/4 and "Chinese" for model with region code 6.
1 Touch [SET].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup
Angle
Adjust the position of the monitor. Default is "0".
1 Touch [SET].
2 Touch desired angle number and [
For detailed operation, see Monitor angle control
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is "iPod".
1 Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [
For detailed operation, see Panel color coordinate
EXT SW
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for each device. Then, touch [
For detailed operation, see EXT SW setup
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see Camera Setup
(P.70).
].
(P.74).
].
(P.74).
(P.72).
].
(P.77).
Return to the Top page
Basic Operations
].
Continued
11