Operation; Before Startup; Description Of The Appliance - Kärcher K 6.550 Manual

Prerequisites for the
appliance's stability
Caution
Create stability for the appliance
prior to all work on or with the
appliance to prevent accidents
or damage.
The stability of the appliance is war-
–
ranted when it is placed onto an
even surface.

Operation

Description of the Appliance

These operating instructions describe
the maximum equipment. Depending
on the model, there are differences in
the scopes of delivery (see packaging).
Illustrations on fold-
out pages!
1 Coupling element
for water connection
2 High pressure connection
3 Water connection with integrated
sieve
4 Appliance switch "0/OFF"/ „I/ON"
5 Dosage regulator for detergent
6 Storage for trigger gun
7 Transport handle
8 Plug 'n' Clean detergent bottle with
locking lid
9 Storage of Plug 'n' Clean detergent
bottle with detergent connection
10 Storage for accessories
11 Storage hook for mains connection
cable
12 Mains cable with mains plug
13 Wheels
14 Trigger gun
15 Lock trigger gun
16 Key to detach the high pressure
hose from the trigger gun
17 Washing brush
18 Spray lance with Dirtblaster
19 Spray lance with pressure regula-
tion (Vario Power)
20 High pressure hose
Special accessories
Special accessories expand the possi-
bilities of using your appliance. Please
contact your KÄRCHER dealer for fur-
ther information.

Before Startup

Mount loose parts delivered with appli-
ance prior to start-up.
Install the storage for trigger gun
Illustration

Place the bottom holder into the re-
cesses and push forward until it au-
dibly locks in.
Illustration

Insert the top holder and push down
all the way.
Install the storage hook for the
mains connection cable
Option
Illustration

Install the bottom storage hook.
Illustration

Install the top storage hook.
Install the dosage regulator for
detergent
You will need the 2 included screws as
well as a Phillips screwdriver PH 2.
Illustration

Insert both detergent hoses onto
the hose fittings.
Install the dosage regulator and
connect using 2 screws.
Install the transport handle
Option
Illustration

Attach the transport handle, insert
the bolts into the bores and screw
them in.
– 9
EN 21