Cable Routing Diagram - Yamaha YZ125(S)/LC Owner's Service Manual

EC240000

CABLE ROUTING DIAGRAM

1 Brake hose
2 Cable guide
3 "ENGINE STOP" button lead
4 Fuel tank breather hose
5 Clamp
6 Throttle cable
7 Wireharness
8 YPVS breather hose
9 Radiator breather hose
0 CDI magneto lead
q "ENGINE STOP" button lead
connector
w Air vent hose (left)
e Overflow hose
r Air vent hose (right)
t Transmission oil breather hose
CABLE ROUTING DIAGRAM
A Fasten the ground lead
together with the front
installation portion of the
ignition coil.
B Pass the throttle cable and
"ENGINE STOP" button lead
into the cable guide. Align
with the cable guide the
front end of the tape on the
throttle cable.
C Pass the fuel tank breather
hose between the handlebar
and tension bar, then insert
its end into the hole of the
number plate.
D Pass the throttle cable and
"ENGINE STOP" button lead
over the radiator hose.
E Clamp the throttle cable,
"ENGINE STOP" button lead
and wireharness to the main
pipe.
2-13
SPEC
F Pass the wireharness on the
outside of the "ENGINE STOP"
button lead.
G Clamp the throttle cable and
wireharness to the main pipe.
H Pass the transmission oil
breather hose, air vent hoses
and overflow hose between
the frame and connecting rod.
I Pass the radiator breather
hose and YPVS breather hose
outside the engine bracket
and inside the down tube. Then
pass the radiator breather
hose inside the YPVS
breather hose.
J Clamp the radiator breather
hose and CDI magneto lead
on the rear of the down-tube.