Listening to USB mass storage device/MP3 player
Note:
This product is not compatible with MTP and AAC file
systems.
To play back USB/MP3 player
■
1
Press the USB button on the remote control or
FUNCTION button on main unit repeatedly to select
USB function. Connect the USB memory device that
has MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
2
Select desired file to be played back by pressing the
or
button.
3
Press the
button. Playback will start.
During playback, press DISPLAY button to display
●
the folder, then track number. It will appear for
about 2 seconds.
Note:
To pause playback:
Press the
button.
The following functions are the same as CD opera-
tion:
●
Direct search
●
Repeat play
●
Random play
●
Playback
●
Programmed play
Note:
If the USB memory device is not connected, "no" will be
shown on the display.
To remove USB memory device
■
1
Press the
button to stop playback.
2
Press the
button again and wait until display "Un"
stops blinking.
3
Disconnect the USB memory device from the USB
terminal.
Notes:
SHARP will not be held liable for the loss of data while
●
the USB memory device is connected to the audio
system.
This USB memory's format supports FAT 16 or FAT
●
32.
SHARP cannot guarantee that all USB memory
●
devices will work on this audio system.
USB cable is not recommended for use in this audio
●
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
E-