Fuel Tank Breather Hose; 2-Stroke Engine Oil - Yamaha PW80(X) Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Fuel tank breather hose

1
2
3
4
1. Fuel tank breather hose
Before operating the motorcycle:
5
G
Check the fuel tank breather hose
connection.
6
G Check the fuel tank breather hose
for cracks or damage, and replace
7
it if damaged.
G
Make sure that the fuel tank
breather hose is not blocked, and
8
clean it if necessary.
9
EAU13412

2-stroke engine oil

Make sure that there is sufficient oil in
the 2-stroke engine oil tank. If the
1
2-stroke engine oil is at or below the
minimum level as shown in the illustra-
tion, add a sufficient amount of the rec-
ommended 2-stroke engine oil as
follows.
1. Minimum level
NOTE:
Make sure that the motorcycle is posi-
tioned straight up when checking the
2-stroke engine oil level. A slight tilt to
the side can result in a false reading.
1. Remove the seat. (See page 3-6.)
2. Remove the 2-stroke engine oil
EAU41201
1. 2-stroke engine oil tank
2. 2-stroke engine oil tank cap
1
3. Install the 2-stroke engine oil tank
NOTE:
Make sure that the 2-stroke engine oil
tank cap is properly closed.
4. Install the seat.
3-4
tank cap and add the recommend-
ed oil.
1
Recommended oil:
See page 8-1.
Oil quantity:
0.95 L (1.00 US qt) (0.84 Imp.qt)
cap.
2