Adjustment; Program Preset (Automatic Search) - Telefunken TTV-299 Owner's Manual

TV Operation
Start operation: Adjustment
1 Program preset (auto search)
When you turn on the TV set for the first time, you must select the "MENU" button
continuously on the TV or the remote control, so that the following menu is displayed
on the screen:
Use "P+/P-" button to select "AUTO STORE" option (it turns from white to green),
then press "V+" button to begin the auto search. The following menu is displayed on the
screen. During auto search, you can press any button to stop the search.
During auto search, the selected programs will be automatically memorized, and be
stored from the current Program number If the number of searched programs has exceeded
the maximum Program number to be stored, the auto searching will stop automatically; If
the number of searched programs does not exceed the maximum Program number to be
stored, at the end of auto search, all the Program numbers not stored with program will be
set as "SKIP ON".
At the end of auto search, the Program number will jump automatically to the first
Program number
2 Program preset (Manual Tuning)
If the auto search function cannot find the desired channel, or you want to preset the
desired channels to a designated Channel number one by one, please use the manual tuning
search function.
TUNING
PROG. 1
AUTO STORE AUTO STORE AUTO STORE AUTO STORE
SEARCH
FREQ.FINE
BAND VHF-L
SKIP OFF
1 11111
AUTO STORE
VHF-L
AUTO
９