Rotisserie Assembly - Weber Vieluxe 27 Built-In Grill Owner's Manual

ROTISSERIE ASSEMBLY

Parts required: rotisserie motor bracket(1), rotisserie
motor(1), rotisserie shaft(1) and spitforks(2 or 4)
1. Install the motor bracket
Attach the motor bracket onto the left side of the cook
box by mounting the bracket key holes over the welded
bolts on the cooking box.
Push the bracket down to lock into position.
2. Attach the motor
Slide the motor onto the motor bracket.
3. Put the spit forks on the rotisserie shaft
Slide the spit forks onto the shaft so that the tines are
facing each other. Reverse forks to each other so that
one fork screw is on top and one is on the bottom, as
shown in illustration. Screw in the split fork screws to
hold the forks in place.
4. Insert the rotisserie shaft in the motor
Insert the pointed end of the rotisserie shaft into
the motor.
5. Set the rotisserie shaft onto rotisserie
support block.
Place the handle end of rotisserie onto the
support rollers.
19