Selecting The Video Input Source To View - Toshiba 32AV700E Owner's Manual

4
When setting the On timer, press s or r to
select the On Timer Position and enter the
program position number you want to watch.
Press EXIT to exit the menu. Set the Standby
mode by pressing
Note:
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the
TV after turned on by on timer function.
Using the Auto Format
When the TV receives a true HDMI signal picture
and the Auto Format is On, it will automatically
be displayed in HDMI signal format, irrespective
of the TV's previous setting.
1
Press MENU, then press v or w to display
the FUNCTION menu.
2
Press s or r to select Auto Format, then
press v or w to select On or Off.
Activating Blue Screen
With the Blue Screen function On, the screen
will automatically turn blue and the sound will be
muted (except for PC input) when no signal is
being received.
1
From the FUNCTION menu, press s or r to
select Blue Screen.
2
Press v or w to select On or Off.
Note:
In the PC input mode or Teletext mode (- page
21), this function is not available.
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you don't touch
the control buttons on the remote control or on
the TV control panel.
1
From the FUNCTION menu, press s or r to
select Automatic Power Down.
2
Press v or w to select On or Off.
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
1
From the FUNCTION menu, press s or r to
select Panel Lock.
2
Press v or w to select On or Off.
Note:
When Panel Lock is On, a reminder will appear
when the buttons on the TV are pressed.
20
Using the TV's features
on the remote control.
If the standby button is pressed, the TV will
switch off and can only be brought out of standby
by using the remote control.
Activating the 4:3 Stretch
When 4:3 Stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the FUNCTION menu, press s or r to
select 4:3 Stretch.
2
Press v or w to select On or Off.
Note:
In HDMI signal format, this function is available.
Adjusting the brightness of Side Panel
You can adjust the brightness of Side Panel in
14:9 or 4:3, etc. mode.
1
From the FUNCTION menu, press s or r to
select Side Panel.
2
Press v or w to adjust the settings as
required.

Selecting the video input source to view

1
Press on the remote control until
the video input mode list appears on the
screen, then press s, r or
appropriate input source (or press o on the
TV right side panel to select required input
source directly).
Inputs
TV
1
2
HDMI1
HDMI2
HDMI3
HDMI4
PC
2
Press Q.
o 1 (o (1), video 1 input),
o 2 (o (2), component video input),
HDMI1, HDMI2, HDMI3, HDMI4 (HDMI input),
PC (o RGB/PC, PC input)
Setting the Manual Settings menu
1
Press MENU, then press v or w to display
the SETUP menu.
2
Press s or r to select Manual Settings,
then press Q.
to select