Selecting The Video Input Source To View; Channel List - Toshiba 24PS10E Owner's Manual

Setting the Location
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in a
shop, etc.
1
From the SETUP menu, press s or r to
select Location.
2
Press v or w to select Home or Store.
Sorting positions
• The TV is capable of receiving a number of
different channels depending upon where you
live.
• Sorting programme position is an easy way
of storing each channel on the programme
position of your choice.
Ex.: To swap channel ABCD (Prog.1) for channel
MNOP (Prog.4):
1
From the SETUP menu, press s or r to
select Manual Tuning menu, and then press
Q.
2
Press s or r to select the channel ABCD,
then press w.
Manual Tuning
Pos. Label
1
2
3
4
5
6
7
8
3
Press s to select the new position "4", then
press v.
4
Press r to select the channel MNOP, then
press w.
5
Press r to select the new position "1", then
press v.
6
Confirm new Manual Tuning menu.

Selecting the video input source to view

1
Press on the remote control until
the video input mode list appears on the
screen, then press s, r or
appropriate input source (or press o on the
TV left side panel to select required input
source directly).
14
Introduction / Getting started
A B C D
E F G H
I J K L
M N O P
to select
2
Press Q.
TV (analogue aerial input),
VIDEO1 (o(1), standard video input),
VIDEO2 (o(2) COMPONENT / VIDEO
INPUT, standard or component video input),
HDMI1, HDMI2 (HDMI input),
PC (o RGB/PC, PC input)
Setting the Manual Settings menu
1
From the SETUP menu, press v or w to
select Manual Settings, and then press Q.
2
Press v or w to select an item, and then
press s or r to select the item as shown
below.
Manual Settings
Colour System : Auto
VIDEO
A
A
A. Colour System
Confirm that Colour System is set to "A"
(Auto). If not, select "A" with s or r.
Note:
Only standard video signal input, this function
is available.
B. Label
The label allows you to label each input
source for your TV.
To change or create labels:
1) Press s or r repeatedly to select a
character for the first space, then press
v or w.
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank
space in the label name, you must
choose a blank space from the list of
characters.
Press Q to store your settings.

Channel List

1
button. The Channel List will
Press the
appear.
2
Press s or r to select a channel, and press
Q to watch.
B
*(blank space)