HOW TO USE THE M~UTE/SECO~ T~ER
The Minute/Second Timer
The Minute/Second Timer has 3 timing functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch number pad 3 and MINUTE pad (for
3 minutes and no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
Step 2: Touch TIME
DEFROST pad.
TIME
DEFROST
Step 3: Touch pads 1,5
and MINUTE for 15 minutes
defrosting time. (Defrosting
is automatically set on power
level 3 but can be changed by
touching the POWER LEVEL
pad and the desired power
level.)
10
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from 1 second
to 99 minutes and 99 seconds. A holding or standing
time may be found in some of your own recipes or in
a cookbook.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds,
touch either TIME COOK I & II, TEMP COOW
HOLD or AUTO ROAST and enter cook time,
temperature or code. Touch MIN/SEC TIMER
and enter number of minutes to delay cooking.
When delaying Temp Coo~old or Auto Roast
cooking, be sure probe is in food. Touch START.
Timer will count down to O and cooking will begin.
Step 4: Set standing or hold
time by touching MIN/SEC
MIN/SEC
TIMER pad.
TIMER
Step 5: Touch 1,0 and MINUTE to hold for
10 minutes.
Step 6: Touch TIME
COOK I &11 pad.
TIME COOK
I &II
Step 7: Touch 2, 5 and MINUTE for 25 minutes of
cooking time.
Step 8: Touch START. As
each function is automatically
START
performed, oven display shows
instructions entered and the
function. When time is up,
the oven signals and flashes
"End."
Need help?
Do you have a question about the Spacemaker JVM140K and is the answer not in the manual?
Questions and answers