GE JVM1190 Owner's Manual page 13

NOTE: Rating plate, oven vent(s) and oven light are located on the inside
walls of the microwave oven.
Optional Kits
Filler Panel Kits
When replacing a
additional width to provide a custom built-in appearance.
For installation between cabinets only; not for end-of-cabinet
installation. Each kit contains two 3²-wide filler panels. Two kits
are needed for a 42² opening.
Filter Kits
Filter kits are used when the microwave oven cannot be vented to
the outside.
Decorative Panel Kit
When replacing a Hi/Low range, the decorative panel kit fills in
the area between the microwave and the range left by the Hi/Low
model.
Available at extra cost from your GE supplier.
Door Latches.
7
Temperature Probe. Use with Temp Cook, Convection
8
Temperature Bake, Combination Temperature Bake,
or Combination Roast only.
Shelf. The metal shelf must be in place on the oven floor
9
when convection or combination cooking. For sensor
combination cooking or convection broiling, the shelf
must be on the upper supports. Remove the shelf for
microwave-only cooking.
Broiler Pan. Consists of a drip pan and a spatter shield.
10
See the Convection Broiling section for instructions.
JX40WH—White
JX41—Black
JX40AL—Almond
36² or 42² range hood, filler panel kits fill in the
JX81—Recirculating Charcoal Filter Kit
JX22SS—Stainless Steel
13