Operation Procedure - Daewoo KOR-1N1H9A Operating Instructions & Cook Book

OPERATION PROCEDURE

This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3-pronged 13 Amp, 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
The oven light is on only when the microwave
oven is operating.
2
The oven door can be open at any time during
opertion by pulling the door open with the
handle on it.The oven will automatically shut off.
3
Each time a pad is touched, a BEEP will sound
to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show " : 0" when the oven is
plugged in.
6
Time clock returns to the present time when the
cooking time ends.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POTENCIA pad. The chart shows the display, the power level and
the percentage of power.
Touch the Power pad
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
7
When the PARAR/BORRAR pad is touched
during the oven operation, the oven stops
cooking and all information retained. To erase all
information(except the present time), touch the
PARAR/BORRAR pad once more. If the oven
door is opened during the oven operation, all
information is retained.
8
If the COMIENZO pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Power level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
8
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%