Light Bulb; Shelves - GE JT965 Owner's Manual

Socket
Receptacle
Bulb
Tab
Glass cover
Roasting rack
Oven shelf
Lower Oven Light Bulb
NOTE: The glass cover (on some
models) should be removed only when
cold. Wearing latex gloves may offer
a better grip.
CAUTION
: Before replacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sure to let the light cover and bulb
cool completely.
For your safety, do not touch a hot bulb
with bare hands or a damp cloth.
To remove:
Turn the glass cover
counterclockwise 1/4 turn until the
tabs of the glass cover clear the
grooves of the socket.
Using gloves or a dry cloth, remove
the bulb by pulling it straight out.
To replace:
Use a new 130-volt halogen bulb,
not to exceed 50 watts.
Using gloves or a dry cloth, remove
the bulb from its packaging. Do not
touch the bulb with bare fingers.
Oven Shelves and Convection Roasting Rack
Clean the oven shelves and the
convection roasting rack with an abrasive
cleanser or steel wool. After cleaning,
rinse the shelves and rack with clean
water and dry with a clean cloth.
NOTE: The oven shelves and convection roasting
rack may be cleaned in the self-cleaning oven.
However, the shelves will darken in color, lose
their luster and become hard to slide if cleaned
during the self-cleaning cycle.
Stainless Steel Surfaces
Do not use a steel-wool pad; it will
scratch the surface.
To clean the stainless steel surface,
use warm sudsy water, a stainless steel
cleaner such as Kleen King
all-purpose liquid or spray cleaner.
Always scrub in the direction of the
grain. Rinse thoroughly with a sponge
or cloth and clean water. Dry with a soft,
clean cloth.
Receptacle
Push the bulb straight into the
receptacle all the way.
Place the tabs of the glass cover into
the grooves of the socket. Turn the
glass cover clockwise 1/4 turn.
For improved lighting inside
the oven, clean the glass cover
frequently using a wet cloth. This
should be done when the oven is
completely cool.
Reconnect electrical power to
the oven.
To make the shelves slide more easily,
apply a small amount of vegetable oil
or cooking oil to a paper towel and wipe
the edges of the oven shelves with the
paper towel.
(on some models)
After cleaning, use a stainless steel
polish, such as Stainless Steel Magic
Revere Copper and Stainless Steel
Cleaner ®
Metal Polish
® or an
instructions for cleaning the stainless
steel surface.
www.GEAppliances.com
Use gloves
or cloth
(lower oven)
or Wenol All Purpose
® . Follow the product
® ,
43