Adjusting T-Arm Sockets - Invacare A-4 User Manual

11 ARMS
5. Reattach the arm pad to the arm tube with the two mounting screws. Tighten securely.
6. Repeat for the opposite side, if necessary.

11.4 Adjusting T-Arm Sockets


Perform this procedure if the T-arm is too loose in the socket or does not easily slide up and down in the socket.
1. Remove the rear wheels from the wheelchair, if necessary. Refer to Removing/Installing Rear Wheels on page 63.
2. Loosen, but do not remove the four socket screws and washers that secure outer T-arm bracket to the inner T- arm bracket.

The T-arm socket will disassemble if the four socket screws and washers are removed.
Invacare® A-4® Wheelchair
Arm Pad
Socket Screws
Mounting Screw
T-Arm Post
FIGURE 5 Adjusting The T- Arms - Depth
Arm Tube (If
necessary, turn arm
tube 180° to obtain
two positions
Mounting Screw
94
Part No 1110545