Adjusting Quick- Release Axle; Installing Quad-Release Axle - Invacare A-4 User Manual
Hide thumbs
Also See for A-4:
- Owner's operator and maintenance manual (76 pages) ,
- Parts catalog (72 pages) ,
- Owner's manual (60 pages)
Table of Contents
Advertisement
8 WHEELS
8.2
Adjusting Quick- Release Axle
1.
Remove rear wheel and quick-release axle from the wheelchair.
2.
Depress detent pin in the quick-release axle and slide axle through
the wheel hub.
3.
Release detent pin ensuring that the locking pins are fully released.
4.
Increase or decrease end play by adjusting the locknut on the end
of the quick-release axle.
WARNING
Make sure the detent pin and locking pins of the
quick-release axle are fully released before
operating the wheelchair.
Keep locking pins clean.
5.
Reinstall rear wheel onto the wheelchair.
8.3
Installing Quad-release Axle
1.
Remove rear wheel and existing quick-release axle from wheelchair.
2.
Remove existing quick-release axle from rear wheel hub.
3.
Insert new quad-release axle through rear wheel hub.
4.
Slide locking collar onto quad-release axle until it is snug against rear wheel and tighten securely with allen screw.
5.
Reinstall rear wheel and the quad-release axle onto the wheelchair.
Invacare® A-4® Wheelchair
Camber Bushing
Locking
Pins
Quick Release Axle
Wheel Hub
FIGURE 2
64
Detent Pin
Adjusting Quick- Release Axle
Part No 1110545
Locknut
Advertisement
Table of Contents
