Advertisement
Quick Links
MICROWAVE OVEN BUILT-IN TRIM KIT
30 (76.2 cm): MEW5530, MEW6530, AEW3530, AEW4530, JJW8130DD, JJW8330DD, JJW9130DD, JJW9330DD
MICROWAVE OVEN SAFETY .................................................. 1
INSTALLATION INSTRUCTIONS............................................. 1
Tools and Parts ...................................................................... 1
Location Requirements .......................................................... 2
Trim Kit Frame ....................................................................... 2
Minimum Cutout Dimensions................................................. 2
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
■
Measuring tape
■
Pencil
■
Phillips screwdriver
W10308504A
INSTALLATION INSTRUCTIONS
Built-In Trim Kit Models UCTK27, UCTK30
UL listed for use over built-in electric ovens:
27 (68.6 cm): MEW5527, MEW6527
MICROWAVE OVEN SAFETY
Your safety and the safety of others are very important.
DANGER
INSTALLATION INSTRUCTIONS
■
Drill
■
7/64" drill bit
■
Tape
Table of Contents
Electrical Requirements ..........................................................2
Microwave Oven Preparation .................................................3
Bottom Duct Assembly...........................................................3
Microwave Oven Installation...................................................4
Install Top and Bottom Brackets ............................................4
Install Trim Kit Frame ..............................................................4
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Tools and Parts
Parts Supplied
Duct base
Aluminum tape
Templates 1 and 2
Trim kit frame
Bottom duct
Rear duct bracket
Rear duct
Top bracket
Bottom bracket
13/16" screws
9/16" screws
(2)
(16)
Upper duct
1/2" screws
(4 - painted)
Advertisement
Related Manuals for Jenn-Air TRIM KIT
Summary of Contents for Jenn-Air TRIM KIT
- Page 1 MICROWAVE OVEN BUILT-IN TRIM KIT INSTALLATION INSTRUCTIONS Built-In Trim Kit Models UCTK27, UCTK30 UL listed for use over built-in electric ovens: 27 (68.6 cm): MEW5527, MEW6527 30 (76.2 cm): MEW5530, MEW6530, AEW3530, AEW4530, JJW8130DD, JJW8330DD, JJW9130DD, JJW9330DD Table of Contents MICROWAVE OVEN SAFETY ..........
-
Page 2: Location Requirements
3" ceiling to microwave oven cutout floor. (7.6 cm) between the top of the oven cutout and the microwave ■ Trim kit frame extends 11/16" (1.8 cm) below, and 1 " oven cutout floor. (4.0 cm) above the cutout opening. -
Page 3: Bottom Duct Assembly
6. Place rear duct on back of microwave oven, as shown, and secure with existing screw removed in Step 5. Bottom Duct Assembly 1. Attach bottom duct to duct base. A. Duct base B. Bottom duct A. Existing screw B. Rear duct 2. -
Page 4: Install Trim Kit Frame
1. Align bottom bracket to duct base, and mark 7 mounting Install Trim Kit Frame holes of bottom bracket, as shown. 1. Position trim kit frame against the top and bottom brackets. 30" (76.2 cm) Make sure the trim kit frame makes contact with the cabinet.