Table of Contents
Advertisement
DVG-9500N 2005.8.10 6:4 PM ˘ ` 16
BASIC OPERATIONS
SYSTEM SETTING
According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Press SYSTEM button on the remote control, then choose TV TYPE.
• When you press the [SYSTEM] button, the TV screen shows
• In case of connecting the component, press the V-MODE on
the remote control to select INTERLACE, PROGRESSIVE or
S-VIDEO.
When you press the [V-MODE] button, the TV screen shows
the information as : "If you want to change, press [V-MODE]
again." Press the [V-MODE] button again to change the
video mode.
When you connect the Composite, picture is not
displayed, press the V-MODE on the remote control to
select Composite video.
DISPLAY
Each time you press the "DISPLAY" button when playing a disc, the TV screen shows
the information as :
DVD
TITLE ELAPSED
CHAPTER REMAIN
VCD
SINGLE ELAPSED
MP3 / CD
Folder / Filelist
16
the information as : "If you want to change, press
[SYSTEM] again." Press the [SYSTEM] button again, the
video out system changes as follows.
PAL
AUTO
V-MODE
(WHEN SELECTING INTERLACE, PROGRESSIVE OR S-VIDEO)
TITLE REMAIN
DISPLAY OFF
SINGLE REMAIN
SYSTEM
NTSC
V-MODE
DISPLAY
CHAPTER ELAPSED
DISPLAY OFF
Advertisement
Table of Contents
