Daewoo DVD5000N Owner's Manual
  1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. DVD Player
  5. DVD5000N
  6. Owner's manual

Daewoo DVD5000N Owner's Manual

Daewoo dvd5000n: owners manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

IMPORTANT SAFEGUARDS

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
IMPORTANT FOR LASER PRODUCTS
• LASER :
This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please
read this owner's manual carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location - see service procedure.
Use of control adjustments or the performance of procedures other than those specified may result in
hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation
when open and interlocks defeated.
DO NOT STARE INTO THE BEAM.
• DANGER : Visible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
• CAUTION : Do not open the top cover. There are no user serviceable parts
inside the Unit; leave all servicing to qualified service personnel.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rule. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception; which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experience radio/TV technical for help.
CAUTION: Any changes or modification in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and servicing
instructions in the literature accompanying the
appliance.
CLASS 1
LASER PRODUCT
• 1 •

Advertisement

Table of Contents
loading

Related Manuals for Daewoo DVD5000N

Summary of Contents for Daewoo DVD5000N

  • Page 1: Important Safeguards

    IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
  • Page 2 IMPORTANT SAFEGUARDS (Continued) This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.
  • Page 3 IMPORTANT SAFEGUARDS (Continued) This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet.To preventelectric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure.
  • Page 4 IMPORTANT SAFEGUARDS (Continued) 22 SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition. 23 WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

  • Page 5: Table Of Contents

    TABLE OF CONTENTS 1. IMPORTANT SAFEGUARDS ---------------------1 2. TABLE OF CONTENTS ----------------------------5 3. FEATURES---------------------------------------------6 4. ABOUT MANUAL-----------------------------------7 5. PLAYABLE DISCS-----------------------------------7 6. TERMS FOR DISCS ---------------------------------8 7. BEFORE OPERATION ----------------------------10 8. PRECAUTIONS FOR DISC ----------------------10 9.PREPARATIONS BEFORE OPERATION ------11 • CHECK ACCESSORIES-------------------------11 •...

  • Page 6: Features

    FEATURES OUTSTANDING SOUND QUALITY Dolby Digital system developed by Dolby Laboratories and DTS developed by DTS Inc., features high quality surround sound, can be played in DVD or CD disc at home, to reproduce high quality sound effects. HIGH DEFINITION The unit adopts MPEG2 coding format and brings the horizontal resolution over 500 lines.

  • Page 7: About Manual

    ABOUT MANUAL PRINCIPLES FOR WRITING • This manual mainly introduces how to use buttons on the remote control. • You may operate the unit if the buttons on the unit have the same or similar names as or to those on the remote control.

  • Page 8: Terms For Discs

    TERMS FOR DISCS TITLE The images or music of a DVD are divided into some units, among which title is the biggest one. When playing a DVD, the movie is the title. When playing a CD, the combined tracks make up the title. CHAPTER It is smaller than title among the units of a DVD.
  • Page 9 TERMS FOR DISCS (Continued) SCENE The menu pictures, motion and motionless pictures of a Super-VCD, VCD or CD with PBC function can be divided into some parts, these parts are scenes. Each scene has a number for search. PBC (PLAYBACK CONTROL) (SUPER-VCD, VCD) It is signals recorded in a super- VCD or VCD2.0 to control playback.

  • Page 10: Before Operation

    BEFORE OPERATION SECURITY • Before operation, check if the voltage of the unit is in line with the local voltage. • Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. • When the plug of the unit is connected to the mains outlet , the unit will be still connected to AC even if the power is turned off.

  • Page 11: Preparations Before Operation

    PREPARATIONS BEFORE OPERATION This part introduces the work to be done before operating the unit. CHECK ACCESSORIES Check if you have all the accessories after the carton is opened. MUTE SUBTITLE ANGLE SET UP 0/10 V-MODE TITLE.PBC INTRO PLAY REPEAT RETURN MENU STEP...

  • Page 12: Front Panel

    PREPARATIONS BEFORE OPERATION (Continued) FRONT PANEL ‘ + “ TITLE SETUP LANG STANDBY/ON II/STEP CHANNEL RETURN SEARCH SKIP % & STANDBY/ON button To switch the unit On or Off when connected to AC power outlet @ PAUSE/STEP button Used to view one frame at a time during play.
  • Page 13 PREPARATIONS BEFORE OPERATION (Continued) PBC DVD SVCD ! PLAY/PAUSE/STEP Illuminates the current operation mode. @ PBC Indicates the PBC PLAY under play SVCD or VCD2.0. # DVD/SVCD/VCD Illuminates the type of a disc loaded on disc tray. $ DTS Indicates the audio type of the disc under play is DTS.

  • Page 14: Names And Layout Of Remote Controls--14

    PREPARATIONS BEFORE OPERATION (Continued) NAMES AND LAYOUT OF REMOTE CONTROLS MUTE SUBTITLE ANGLE SET UP 0/10 V-MODE TITLE.PBC INTRO & PLAY REPEAT RETURN MENU STEP PROGRAM ZOOM VOLUME A-TIME SLOW MEMORY CHANNEL LANGUAGE • 14 • ! STANDBY/ON @ OSD # SUBTITLE $ ANGLE % SETUP...

  • Page 15: Rear Panel

    PREPARATIONS BEFORE OPERATION (Continued) REAR PANEL ! DIGITAL AUDIO COAXIAL/OPTICAL OUT Connects digital audio under play mode into an AV amplifier or a receiver equipped with digital audio decoder for you to enjoy the theatre-quality sound in your home. @ VIDEO OUT Connects composite video signal to input AV or PHONO sockets of TV or monitor to achieve high fidelity colour reproduction.

  • Page 16: Connections

    CONNECTIONS Turn off all equipment before operation. The unit has many kinds of output modes like A/V output, S-VIDEO output and digital signal output (COAXIAL, OPTICAL). You may select as you need. CONNECTED TO A TV VIDEO AUDIO IN 1. If the TV has S -VIDEO input, please connect the unit and the TV with S-video cord (not supplied).
  • Page 17 CONNECTIONS (Continued) CONNECTED TO A TV WITH COMPONENT • If the TV has component input, please connect the unit and the TV with component cord (not supplied). You do not have to utilise component but it will give clearer images. Notes: •...
  • Page 18 CONNECTIONS (Continued) CONNECT TO AN AUDIO AMPLIFIER • Optical or coaxial can be selected at your option while connecting • If you have a DTS decoder of processor, you can enjoy DVD disc or CD sound decoded by 5.1 channel DTS. ie : 5 surround speakers + 1 woofer •...

  • Page 19: Basic Operations

    BASIC OPERATIONS PLAY DISCS TV/AUDIO SELECTION Press on the TV and audio system. 1. Press "TV/VIDEO" on the TV, select VIDEO mode (TV). TV/VIDEO • Select S-VIDEO mode if using an ‘S’ Video connection. 2. Select the right audio input on the amplifier.

  • Page 20: System Setting

    BASIC OPERATIONS (Continued) SYSTEM SETTING According to the system of the TV to be connected ,set the system of the unit to make it match the TV. TITLE.PBC INTRO PLAY REPEAT RETURN MENU STEP ZOOM 1. If the system of the TV is NTSC : Press , select NTSC.

  • Page 21: Volume Control

    BASIC OPERATIONS (Continued) VOLUME CONTROL (EXCEPT SPDIF/RAW) • Press on the TV or VOLUME amplifier to adjust the volume. • Press on the remote control. VOLUME STEP PROGRAM ZOOM VOLUME SLOW A-TIME MEMORY CHANNEL LANGUAGE 1. Press + to raise the volume. 2.

  • Page 22: Pbc Play

    BASIC OPERATIONS (Continued) PBC PLAY When playing a super-VCD or VCD2.0, you can enjoy the basic interactive function. Example: VCD2.0 1. Press , the screen shows the home menu. 2. Press number buttons to select. Example: select home menu1. 3. The screen shows the sub-menu after the unit enters home menu1.

  • Page 23: Play Discs In Various Ways

    PLAY DISCS IN VARIOUS WAYS SELECT LANGUAGE WHEN PLAYING DVD Press , the screen shows as LANGUAGE below. AUDIO 1/2:AC-3 2CH ENGLISH Press again. LANGUAGE AUDIO 2/2:AC-3 5.1CH ENGLISH Different discs differ in languages. SELECT CHANNEL WHEN PLAYING CD CHANNEL MONO LEFT CHANNEL MONO RIGHT...

  • Page 24: Fast Play

    PLAY DISCS IN VARIOUS WAYS (Continued) FAST PLAY When playing a disc, you may play it in Cue or Review mode to find what you want. WHEN PLAYING DVD 1. Press to play forward fast. Each time you press the button, the screen shows in order: FF 2X FF 4X...

  • Page 25: Slow Play

    PLAY DISCS IN VARIOUS WAYS (Continued) SLOW PLAY Enjoy slow motions by the following steps. RETURN MENU STEP ZOOM PROGRAM VOLUME A-TIME SLOW MEMORY CHANNEL LANGUAGE WHEN PLAYING DVD 1. Press to play slowly. SLOW SLOW The screen shows in order: SR 2X SF 2X SF 4X...

  • Page 26: Repeat Some Parts

    PLAY DISCS IN VARIOUS WAYS (Continued) Super-VCD, VCD, CD, MP3 • You may repeat a track, a disc according to the following steps • VCD 1.1 and CD can play repeatedly directly. • Super VCD and VCD 2.0 can play repeatedly in PBC OFF mode.

  • Page 27: Select Subtitles

    PLAY DISCS IN VARIOUS WAYS (Continued) SELECT SUBTITLES When playing a multi-subtitle DVD or super-VCD, you may select one subtitle to show it on the screen. SUBTITLE ANGLE SET UP 0/10 WHEN PLAYING DVD 1. Press to select one. SUBTITLE The screen shows: SUBTITLE 01/03:ENGLISH 2.

  • Page 28: Select Angles

    PLAY DISCS IN VARIOUS WAYS (Continued) SELECT ANGLES Some discs have images with different screen angles, you may select among them. For example,when you watch a running train, you may select to watch it from the front, the left window or the right window without stopping it.

  • Page 29: Time Search And Remaining Time--29

    PLAY DISCS IN VARIOUS WAYS (Continued) TIME SEARCH AND REMAINING TIME MENU STEP PROGRAM ZOOM VOLUME SLOW A-TIME MEMORY A-TIME CHANNEL LANGUAGE TIME SEARCH You may directly enter a time, title or chapter number to search fast on a disc, the unit plays from the point entered.

  • Page 30: Remaining Time

    PLAY DISCS IN VARIOUS WAYS (Continued) REMAINING TIME This function can be used to know the remaining time of a title, chapter or track. 1. Press , the screen shows the remaining time of the title. TITLE REMAIN 00:56:45 2. Press , the screen shows the playing time of the chapter.

  • Page 31: Resume Play

    PLAY DISCS IN VARIOUS WAYS (Continued) RESUME PLAY The unit can memorize the last point where it stops and resume playback from there. WHEN PLAYING CD, MP3 1. Press to stop playing. STOP 2. Press to resume playback. MEMORY MEMORY Notes: 1.

  • Page 32: Program Play

    PLAY DISCS IN VARIOUS WAYS (Continued) PROGRAM PLAY (VCD, AUDIO CD only) You may program the tracks on a disc and play them in the programmed order. RETURN MENU STEP PROGRAM ZOOM VOLUME SLOW A-TIME MEMORY CHANNEL WHEN PLAYING SUPER-VCD, VCD, CD 1.
  • Page 33 PLAY DISCS IN VARIOUS WAYS (Continued) The unit shows the starting picture of all the scene on the screen simultaneously. SCENE01 SCENE02 SCENE03 SCENE08 SCENE09 SCENE04 SCENE07 SCENE06 SCENE05 If the scene number is more than 9, press to look at the next picture. 4.

  • Page 34: Play Karaoke

    PLAY DISCS IN VARIOUS WAYS (Continued) WHEN PLAYING CD 1. Press after the unit stops. INTRO INTRO The screen shows: 1. INTRO 3. ---- 2. ---- 4. EXIT 2. Press number buttons to select a digest mode. Press button 1 for intro mode. The unit plays the first 15 seconds of each track one after another.

  • Page 35: Function Setting

    FUNCTION SETTING DVD MENU SETTING According to the recorded information and external equipment,set the following functions for DVD to obtain the best playing status. SET UP 0/10 V-MODE TITLE.PBC INTRO 1. Press to set the main menu. SETUP SETUP The screen shows: SETUP MENU -- MAIN PAGE GENERAL SETUP DOLBY DIGITAL SETUP...
  • Page 36 FUNCTION SETTING (Continued) 3.Exit from menus. Using direction buttons go to “ MAIN PAGE” menu, then press The screen shows. SETUP MENU--MAIN PAGE GENERAL SETUP DOLBY DIGITAL SETUP PREFERENCES EXIT SETUP • To select “GENERAL SETUP” menu, press PLAY GENERAL SETUP The setting structure is as follows: TV DISPLAY >>...
  • Page 37 FUNCTION SETTING (Continued) TV TYPE You may select according to the colour system of the TV to be connected. • Select "AUTO" for a multi-system TV. • Select "NTSC" for a NTSC TV. • Select "PAL" for a PAL TV. PIC MODE •...

  • Page 38: Dolby Digital Setup

    FUNCTION SETTING (Continued) DOLBY DIGITAL SETUP The setting structure is : - -DOLBY DIGITAL SETUP PAGE - - OP MODE >> LINE OUT DUAL MONO >> STEREO L-MONO R-MONO MIX-MONO DYNAMIC >> FULL MAIN PAGE OP MODE • LINE OUT: Compress input signals linearly.
  • Page 39 FUNCTION SETTING (Continued) SELECT LANGUAGE If a language mentioned above is recorded on the disc, you can select audio, subtitle or disc menu languages. If not, the language recorded on the disc is shown. PARENTAL The content of a disc with lock function is evaluated by grades.

  • Page 40: Troubleshooting

    TROUBLESHOOTING If you experience the following problems while using the unit, this troubleshooting guide can help you. No sound • Check if you press the MUTE. • Check if the unit is properly connected. • Make sure you operate the TV or amplifier correctly.

  • Page 41: Technical Specifications

    TECHNICAL SPECIFICATIONS Laser wavelength 650nm Television signal NTSC /PAL/AUTO Frequency response 20Hz ~ 20KHz ≥ 90dB (At 1KHz, JIS A-Weighted) Audio Signal/noise ratio ≤ - 60dB (At 1KHz, 0dB) Audio distortion + noise ≥ 90dB ( 1KHz) Channel separation ≥ 85dB ( 1KHz) Dynamic range output level : 2.0 ±...

  • Page 42: Regional Restriction Code

    REGIONAL RESTRICTION CODE Regional restriction codes are built in this DVD player model and all DVD discs for each sales region throughout the world. If regional code of this DVD player does not match with regional code of DVD disc that you want to playback, if won’t work. The regional code number can be found the diagram below .
  • Page 43 OWNER’S MANUAL D V G - 5 0 0 0 N TITLE SETUP LANG STANDBY/ON II/STEP CHANNEL RETURN SEARCH SKIP OPEN/ CLOSE PLAY STOP DVD/VCD/SVCD/DVCD/CD/MP3/CD-R/CD-RW MIC1 MIC2 0/10 LEVEL ECHO...
  • Page 44 Warranty Daewoo Electronics Canada Inc. (DECI) warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company’s option) in exchange for any part of any unit...

This manual is also suitable for:

Dvg-5000n

Table of Contents