System Setting; V-Mode - Daewoo DV-3500H Instruction Manual

EasternDV- 3500H Eng 2008.9.20 6:37 PM ˘ ` 17

SYSTEM SETTING

According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
In STOP mode, press SYSTEM button on the remote control, then choose TV TYPE.
• When you press the [SYSTEM] button, the TV screen shows

V-MODE

There are variety of ways to connect the DVD player to your TV.
(refer to 14page)
Choose one of the following video output modes by pressing
[V-MODE] button, depending on the connection from DVD
player to your TV.
• Scart connection - RGB mode
• Component connection - Progressive mode or Interlace mode
• S-Video connection - S-video mode
• Composite connection - Interlace mode
• HDMI connection - HD mode (For more details, refer to 15page)
When video output mode is not proper for the connection, no picture or no
sound may occur.
N ote: N
When you use the SCART connection together with the S-Video connection or
the Component (Y, Pb, Pr) connection, the picture of RGB (Scart) mode may
dim.
the information as : "If you want to change, press
[SYSTEM] again." Press the [SYSTEM] button again, the
video out system changes as follows.
PAL
Auto
(WHEN SELECTING S-VIDEO/INTERLACE/RGB/PROGRESSIVE/HD mode)
Check whether your TV has the function of progressive before selecting
progressive mode. If your TV does not accept the progressive, you can select
the Interlace mode.
BASIC OPERATIONS
SYSTEM
NTSC
V-MODE
17