System Setting; V-Mode - Daewoo DV-3000S Instruction Manual

Eastern DV-3000S (Eng) 2008.7.9 11:36 AM ˘ ` 16
BASIC OPERATIONS

SYSTEM SETTING

According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Press SYSTEM button on the remote control, then choose TV TYPE.
• When you press the [SYSTEM] button, the TV screen shows

V-MODE

There are variety of ways to connect the DVD player to your TV.
(refer to page 14)
Choose one of the following video output modes by pressing
[V-MODE] button, depending on the connection from DVD
player to your TV.
• Scart connection - RGB mode
• Component connection - Progressive mode or Interlace mode
• S-Video connection - S-video mode
• Composite connection - Interlace mode
When video output mode is not proper for the connection, no picture or no
sound may occur.
N N ote:
When you use the SCART connection together with the S-Video connection or
the Component (Y, Pb, Pr) connection, the picture of RGB (Scart) mode may
dim.
16
the information as : "To Change Press SYSTEM again."
Press the [SYSTEM] button again, the video out system
changes as follows.
AUTO
NTSC
(WHEN SELECTING S-VIDEO/INTERLACE/ PROGRESSIVE/RGB )
Check whether your TV has the function of progressive before selecting
progressive mode. If your TV does not accept the progressive, you can select the
Interlace mode.
SYSTEM
PAL
V-MODE