The Hp Server Cc2300 And Cc3300 User Information, Diagnostics And Utilities Resource Cd - HP Carrier-grade cc2300 Start Manual

7. From the Main menu of the BIOS Setup Utility, use the arrow keys to move the cursor down to
the system date and time selections. Position the cursor over the date and time values and enter
appropriate values.
8. Use the <TAB> key to access the Exit menu and select the item to save changes and exit the
BIOS Setup Utility. After you exit the utility the boot procedure resumes. You can monitor the
remainder of the boot progress on the video display.
The HP Server cc2300 and cc3300 User Information,
Diagnostics and Utilities Resource CD
The cc2300/cc3300 ResourceCD has the following contents:
·
Utilities:
¾ CSSU
¾ SSU
¾ ISC 3.5
¾ FRU/SDR Load Utility
¾ Service Partition Admin Utility
·
cc2300 Carrier Grade Server Product Guide
·
Adobe Acrobat Reader
The cc3300/cc2300 resource CD comes with a menu driven program that can be used for the
following:
1. Install ISC Service Partition. The ISC service partition provides the ability to remotely
access the cc2300 server via modem or LAN for the purpose of executing
configuration/setup utilities and diagnostics.
2. Run cc2300 Intel Server Control (ISC) based utilities. Refer to the Intel ® Server Control
User's Guide For the HP cc2300 & cc3300 Carrier Grade Servers for detailed ISC
information.
3. To invoke the cc2300/cc3300 Resource CD menu: Insert the Resource CD into the
CDROM drive.
4. Restart the server.
5. When the "F2 to enter setup" message appears, quickly press F2.
6. In Setup, use the arrow keys to select the Boot menu.
7. Use the arrow keys to select Boot Device Priority then press Enter.
8. Select ATAPI CDROM and use the + key to move the selection to the top of the list.
9. Press F10.
10. Select Yes to confirm saving of the current settings and press Enter. The server restarts and
boots from the Resource CD.
11. When the menu appears, use the arrow keys to select the Utilities menu.
HP cc2300 Carrier Grade Server Quick Start Guide 17