Brocade Communications Systems Brocade 8/12c Documentation Update page 159

Brocade network advisor documentation updates v11.1.x (53-1002363-03, august 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

TABLE 298
Field
RX
TX_UTILIZATION
RX_UTILIZATION
RX_EOF
UNDERFLOW_ERROR
OVERFLOW_ERRORS
CRC_ERRORS
ALIGNMENT_ERRORS
RUN_TIME_ERRORS
EXCESS_COLL_ERRORS
EXCESS_FCTRL_ERRORS
LOST_FCTRL_ERRORS
TOO_LONG_ERRORS
LAST_UPDATE__TIME
Brocade Network Advisor Documentation Updates
53-1002363-02
SWITCH_TE_PORT_PERFORMANCE (Continued)
Definition
The number of octets or bytes that have been
received by this port. One second periodic polling of
the port. This value is saved and compared with the
next polled value to compute net throughput. Note,
for Fibre Channel, ordered sets are not included in
the count
The computed value of TX based on speed of port
The computed value of RX based on speed of port
Total number of frames received at this port
The total number of packets received that were less
than 64 octets long (excluding framing bits, but
including FCS octets) and were otherwise well
formed.
The total number of packets received that were
longer than 1518 octets (excluding framing bits, but
including FCS octets) and were otherwise well formed
The total number of packets received that had a
length (excluding framing bits, but including FCS
octets) of between 64 and 1518 octets, inclusive, but
had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS
with a non-integral number of octets (Alignment Error)
'The number of frames detected that contain partial
octets and don''t pass the FCS check.
The total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
Increments when the port unsuccessfully transmits a
packet 16 consecutive times
Increments when the port applies flow control 16
consecutive times
The number of packets lost (if flow control is diabled)
or number of packets retransmitted by the originator
due to flow control (if flow control is enabled)
The total number of packets received that were
longer than 1518 octets (excluding framing bits, but
including FCS octets), and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error)
Time when this stats record was updated
Database tables and fields
Format
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
double
precision
timestamp
E
Size
151

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network advisor 11.1.0Brocade bladesystem 4/24

Table of Contents