Mode Light Button; Remote Controller Functions Overview - WowWee Roboboa User Manual

Mode Light button / Remote controller functions overview

Mode Light button

You can press the Mode Light button on top of the Roboboa's head to stop him
in place, and then enter one of three different Lighting modes: Spotlight, Wide,
and Full.
When Roboboa is in these Lighting modes, he cannot see or move by himself.
However, he will revert back to Aware mode after about 1 hour if he does not
receive a signal or any other input.
NOTE: If you hold this button down for more than 2 seconds, Roboboa will
enter Safety Light mode where he will turn his lights on anything shown in front
of him. (For more details, see page 13).


Remote controller functions overview

Most of the Roboboa functions can be controlled from his multi-function
remote controller.
Note: Both the small Mode button and the large Mode button on the remote
controller have the same function for left or right hand use.
Command Description
Instant commands Press any action button quickly once.
Example: press the Demo button.
Held commands Press and hold any action button for more than
2 seconds.
Example: press and hold the Demo button to
get Party mode.
Press and hold the Mode button, then press any
Mode commands
action button within 2 seconds.
Example: Hold the Mode button down then
press the Demo button to change the volume.
Roboboa's remote controller can be used
by right or left handed users. You can lay
it flat, on its side, or even use it as a smart
flashlight. Each of the buttons on the
remote controller can be used for more
than one function: