Command Prompts; Screen Simulations; Configuration And Operation Examples; Keys - HP ProCurve Switch 6120G/XG Management Manual

Command Prompts

In the default configuration, your switch displays a CLI prompt similar to the
following examples:
ProCurve 6120G/XG Blade Switch#
ProCurve 6120XG Blade Switch#
To simplify recognition, this guide uses ProCurve to represent command
prompts. For example:
ProCurve#
(You can use the hostname command to change the text in the CLI prompt.)

Screen Simulations

Displayed Text. Figures containing simulated screen text and command
output look like this:
ProCurve> show version
Image stamp: /sw/code/build/vern
July 27 2009 13:42:40
Z.14.04
1037
Boot Image: Primary
Build Options: QA
Watchdog: ENABLED
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear without figure iden-
tification. For example:
ProCurve(config)# clear public-key
ProCurve(config)# show ip client-public-key
show_client_public_key: cannot stat keyfile

Configuration and Operation Examples

Keys

Simulations of actual keys use a bold, sans-serif typeface with square brackets.
For example, the Tab key appears as [Tab] and the "Y" key appears as
Getting Started
Conventions
[Y] .
1-3