The connected light can be turned ON in three ways:
With a Z-wave remote.
Manually with the pushbutton on the
By the Load-Sensing feature. Normally, the Z-Wave
module controls the ON/Off state of the connected
light and power is either turned On or Off at the module
(either manually or by the remote). If the switch on the
connected light is used, the Z-Wave control circuitry
automatically senses that the light is being turned On
and activates the Z-wave controlled outlet, providing
power to the connected device. This feature is disabled
by default; see the section on advanced operation for
instructions on how to enable it.
GE Z-Wave remotes provide control of an Individual device, Groups of
devices and Scenes. Other brands of Z-Wave Certified remotes may
not offer as much flexibility in how you can set up your lighting control
network. Please refer to your remote control's instructions for details
on its capabilities and instructions for adding and controlling devices.
The Front Panel Pushbutton on the 45602 Lamp Module
allows the user to:
Manually turn the connected lighting ON/OFF by
pressing the button.
- This is a toggle switch; if the light is OFF, pressing the button
turns the light ON and vice versa.