Setting Up Default Gateway; Setting Up Static Route - Asus DSL-N13 User Manual

Setting up default gateway
This section allows to manually setup default gateway of Internet connection.
1. Click Advanced Setup -> Routing -> Default Gateway to open the configuration page.
2. By default, automatic assigned default gateway is enabled, that is, the router
accepts the first received gateway assignment from ISP. If your ISP specifies a
gateway, uncheck Enable Automatic Assigned Default Gateway and enter the
gateway address.
3. Press Save/Apply to save and activate the settings.
Setting up static route
For simple networks that have only one router, you do not need to set up static route.
For more complicated network such as an enterprise network where several routers and
different subnets exist, you need to configure static routes so as to direct the network
traffic correctly.
1. Click Advanced Setup -> Routing -> Static Route to open the configuration page
and view the current static route settings. Press Add to create a new static route.
2. The configurable settings include:
• Destination Network: input the IP address of destination;
• Subnet Mask: input the subnet mask of destination;
• Use Gateway IP Address: input the gateway network address (optional);
• User Interface: select the interface of your router to which the static route applies.
3. Press Save/Apply to save and activate the settings.
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
41