Table of Contents
Advertisement
3. Select Enable in the WEP Encryption field to use WEP keys for data encryptions.
Select 64-bit or 128-bit Encryption Strength for key length then click Set
Encryptioin Keys button to setup the keys. If you do not want to encrypt data,
select Disable in WEP Encryption and skip to Step 5.
4. After you click the Set Encryptioin Keys button, you are directed to another
page to setup the keys. You can select Enable ASUS Passphrass and input a
passphrase in the first box below, the system automatically generates four netwrok
keys for you. You can also disable ASUS Passphrass and input four keys manually.
Record the passphrase (if any) and keys in your note.
5. Press Save/Apply to save and activate the settings.
Shared
1. Click Wireless -> Security in the left side menu to open the configuration page.
2. Select Shared in the Network Authentication field to use WEP authentication.
3. The WEP Encryption is fixed to Enabled because Shared mode use the same
WEP keys for both encryption and authentication.
4. Select 64-bit or 128-bit Encryption Strength for key length then click Set
Encryption Keys button to setup the keys. Refer to Open mode Step 4 for key
configuration.
5. Press Save/Apply to save and activate the settings.
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
23
Advertisement
Table of Contents
