Table of Contents
Advertisement
DSL-N13 Wireless ADSL 2/2+ Modem Router User Manual
Access time restriction
This function enables to put time restriction on Internet access by setting up blocking
time table. To configure the access time restriction:
1. Click Advanced Setup -> Security -> Parental Control in the left side menu to
open the configuration page. Click Add to create a new rule.
2. Fill in the User name to whom you want to apply the restriction.
3. Fill in the MAC address of the restricted host. If you are accessing this configuration
at the computer of restricted host, select Browser's MAC Address radio button. The
system automatically detects the MAC address of the configuration console. If you
want to configure hosts other than the console computer, enter the MAC address
manually.
To get the MAC address of a host, click Start menu on the desktop of
the host, select Run..., type cmd into the box and press OK, then type
command ipconfig /all and press enter. You can find the MAC address
displayed as Physical Address.
4. Select the days of a week to which the rule shall apply.
5. Fill time into the Start Blocking Time and End Blocking Time box to set up block
time.
6. Press Save/Apply to save and activate the settings.
36
Advertisement
Table of Contents
