Adjusting Subwoofer Settings; Adjusting Source Levels - Pioneer KEH-P6025 Operation Manual

Section
Audio Adjustments
06

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
AUDIO
ting.
When the subwoofer output is on, you can
select the subwoofer setting. Press
appears in the display.
80Hz
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
.
125Hz
2 Press 2 or 3 to select cut-off frequency.
Press 2 and
50Hz
is displayed. Only frequencies lower than
125Hz
those in the selected range are output from the
subwoofer.
3 Press 5 or ∞ to adjust the output level of
the subwoofer.
Each press of 5 or ∞ increases or decreases
the level of the subwoofer (e.g.,
Press 5 or ∞ until you see the desired value
displayed.
28
En
to select the subwoofer set-
AUDIO
50Hz
is displayed. Press 3 and
to
+6 –6

Adjusting source levels

SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the
FM tuner, which remains unchanged.
until
1 Compare the FM tuner volume level with
the level of the source you wish to adjust (e.g.,
built-in CD player).
or
2 Press
Press
AUDIO
3 Press 5 or ∞ to adjust the source volume.
Each press of 5 or ∞ increases or decreases
the source volume.
•
SLA :+4
volume is increased or decreased.
Notes
• Since the FM tuner volume is the control, it is
).
not possible to apply source level adjustments
to the FM tuner.
• The AM tuner volume level can also be
adjusted with source level adjustments.
to select .
AUDIO SLA
until appears in the display.
SLA
– is displayed as the source
SLA :–4