Cassette Player; Playing A Tape - Pioneer KEH-P6025 Operation Manual

Cassette Player

Playing a tape

q
These are the basic steps necessary to play a
tape with your cassette player. More advanced
cassette player operation is explained starting
on page 14.
1 indicator
TAPE DIRECTION
Shows the direction of the tape transport.
2 indicator
PLAY TIME
Shows the elapsed playing time of the cur-
rent side of the tape.
1 Press to open the front panel.
OPEN
Cassette loading slot appears.
2 Insert a cassette tape into the cassette
loading slot.
Playback will automatically start.
Cassette loading slot
TAPE EJECT
• You can eject a cassette tape by pressing
.
TAPE EJECT
3 Close the front panel.
w
button
• After a casette tape has been inserted, press
to select the cassette player.
SOURCE
4 Use to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
5 To perform fast forward or rewind, press 2
or 3 .
or appears in the display.
FF REW
• To cancel fast forward or rewind and return to
playback, press
BAND/ESC
• You can cancel fast forward or rewind by
pressing 2 or 3 in the same direction twice.
6 To perform forward or rewind music
search, press 2 or 3 twice.
(forward music search) or
F-MS
music search) appears in the display. The cas-
sette player will fast forward or rewind to the
next or previous blank spot on the tape and
begin to play.
• To cancel music search and return to play-
back, press
BAND/ESC
• You can cancel music search by pressing 2
or 3 in the same direction again.
7 To change the direction of the tape trans-
port, press .
BAND/ESC
Notes
• Do not insert anything other than a cassette
tape into the cassette loading slot.
• indicator starts from
PLAY TIME
following cases:
— When a tape is inserted
— When the tape direction is changed
— When you rewind the tape to the beginning
• indicator is halted when fast for-
PLAY TIME
ward, rewind or music search is operating.
.
(rewind
R-MS
.
in the
00'00"
En
Section
04
13