Setting The Fm Tuning Step; Setting The Am Tuning Step; Switching The Warning Tone; Switching The Auxiliary Setting - Pioneer KEH-P6025 Operation Manual

Multi-cd control high power cassette player with fm/am tuner
Hide thumbs Also See for KEH-P6025:
Table of Contents

Advertisement

Available languages

Available languages

Section
Initial Settings
07

Setting the FM tuning step

The tuning step employed by Seek Tuning in the
FM mode can be switched between 100 kHz
(preset at the factory) and 50 kHz.
1 Press
to select
.
FUNCTION
FM STEP
Press
repeatedly until
FUNCTION
FM STEP
appears in the display.
2 Select the FM tuning step with 2/3.
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
to select
.
FUNCTION
AM STEP
Press
repeatedly until
FUNCTION
AM STEP
appears in the display.
tuning step with 2/3.
2 Select the
AM
Pressing 2/3 will switch the AM tuning step
between 9 kHz and 10 kHz. The selected AM
tuning step will appear in the display.
En

Switching the warning tone

If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
to select
.
FUNCTION
WARN
Press
repeatedly until
FUNCTION
WARN
appears in the display.
on or off with 5/∞.
2 Select
WARN
Pressing 5/∞ will switch
between on
WARN
and off and that status will be displayed (e.g.,
).
WARN :ON

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using external equipment connected to this
unit.
1 Press
to select
.
FUNCTION
AUX
Press
repeatedly until
appears
FUNCTION
AUX
in the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
between on and
AUX
off and that status will be displayed (e.g.,
).
AUX :ON
Page 30

Advertisement

Table of Contents
loading

Table of Contents