Connecting The Tv Signal; Connecting Tv Signal Directly To Computer - HP TV User Manual

2

Connecting the TV signal

The TV signal may come from an antenna, a cable TV signal provider, or a satellite TV signal
provider. For best results, the TV signal should be connected directly to the computer. If using a set-
top box to connect to the computer, additional cables (not provided) may be required.
NOTE: The location and number of connectors for the TV signal may vary by model.
NOTE: The Television (Electronic) Program Guide is not available in all countries/regions.
Your computer may not include all the cables needed for the television setup. You may need to
purchase cables, a coaxial signal splitter, or other accessories separately.
For more information about TV signals and TV tuners, see the Microsoft web site:
and click Windows 7

Connecting TV signal directly to computer

NOTE: The location and number of connectors may vary by model.
Connect the coaxial cable from your TV antenna or TV signal provider directly into the computer. The
TV signal is either an analog cable or digital antenna signal.
1. Determine the location of the TV In or TV Input connector (4) on your computer. The location of
this connector varies by computer.
2. Plug the connector of a coaxial cable (2) from your TV antenna (1), or TV signal provider, to the
TV In or TV Input connector (4) on the computer.
3. Turn the connector to tighten it.
1
2
3
2 Chapter 2 Connecting the TV signal
and then type tv tuner in the search bar.
1
4
2
3
www.microsoft.com
1
4
2
3
4
ENWW