Tip
•
In standby mode, you can also press CD, TUNER, MP3
LINK to switch on the unit.
Switch to standby mode
Press
again to switch the unit to standby
mode.
» The clock (if set) appears on the display
panel.
Note
•
When the unit remains idle for 15 minutes, it switches
from standby mode automatically.
Set clock
1
In standby mode, press and hold CLOCK
on the remote control to activate the
clock setting mode.
» The 12/24 hour format blinks.
2
Press
/
repeatedly to select the
format.
» The hour digits are displayed and begin
to blink.
3
Press
/
to set the hour.
4
Press CLOCK.
» The minute digits are displayed and
begin to blink.
5
Press
/
to set the minute.
6
Press CLOCK to confirm.
• To exit clock setting mode without
storing, press .
7
To view the clock, press CLOCK.
Note
•
After 90 seconds in idle mode (no button is pressed),
the system exits the clock setting mode automatically.
12
EN
4 Play
Basic play operations
You can control play through following
operations.
Key
Function
/
Press and hold to fast-forward/fast-
reverse the track during playback,
then release to resume play.
To pause/resume play during
playback.
DISPLAY
Select different play information.
REPEAT
To select a repeat play mode:
[REP] (repeat): play current track
repeatedly.
[REP ALL] (repeat all): play all
tracks repeatedly.
Press again to return to normal
play.
SHUFFLE
To play tracks randomly.
Press again to return to normal
play.
Play discs
1
Press CD on the remote control to select
the disc source.
2
Press on the top of the main unit.
» The disc door opens.
3
Place a disc face up onto the tray and
press again.
» Play starts automatically.
Tip
•
If your main unit does not start to play, press
to select a track and then press
/