Connect Power; Prepare The Remote Control; Turn On - Philips MCM1120 User Manual

• Insert the red wires to "+", black wires
to "-".
3
Release the socket flap.
a b

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, make sure that
you have completed all other connections.
Connect the power cable to the wall socket.

Prepare the remote control

•
•
•
c
•
To insert the remote control battery:
1
2
3

Turn on

Press
» The unit switches to the last selected source.
Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Open the battery compartment.
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
Close the battery compartment.
to turn on.
EN 11