Set Sleep Timer; Listen To External Audio Device; Listen Through Headphone; Product Information - Philips MCM1120 User Manual

Note
•
Alarm timer is not available in MP3 LINK mode.
•
If DISC/USB source is selected, yet no disc is placed or
no USB is connected, the system switches to the tuner
source automatically.

Set sleep timer

When the unit is turned on, press SLEEP
repeatedly to select a time period (in minutes).
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press SLEEP again
until disappears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
• For audio device with headphone
sockets:
Connect MP3 Link cable to the MP3-
LINK socket and to the headphone
socket on the audio device.
2
Select MP3-LINK source.
3
Play the device.

Listen through headphone

Plug a headphone into the
is
socket on the unit.
7 Product
information
Note
•
Product information is subject to change without prior
notice.

Specifications

Amplifier
Rated Output Power
Frequency Response
Signal to Noise Ratio
Aux Input
Disc
Laser Type
Disc Diameter
Support Disc
Audio DAC
Total Harmonic
Distortion
Frequency Response
S/N Ratio
Tuner
Tuning Range
Tuning Grid
Sensitivity
- Mono, 26 dB S/N Ratio
Search selectivity
2X5W RMS
60 - 16 kHz, ±3dB
>65 dB
0 5 V RMS 20kohm
Semiconductor
12cm/8cm
CD-DA, CD-R, CD-
RW, MP3-CD
24Bits / 44.1 kHz
<1%
60 Hz -16 kHz (44.1
kHz)
>65dBA
FM: 87.5 - 108 MHz
50 KHz
< 22 dBf
< 36 dBu
EN 17