Power Fail Transfer (Pft); System Voice Memo - LG-Ericsson iPECS LIP-8050V User Manual

To terminate the Alarm signal:

Dial 565 (Alarm Stop code).
To activate the Door Open contacts:

Lift the handset,

Dial Door Open code, #* and contact number 1-4.
9.6

Power Fail Transfer (PFT)

9.7

System Voice Memo

Alarm Monitor—should the external contact activate, a unique
Alarm Ring signal and LCD display may be received. To restart
the monitor circuit, the external contacts must be deactivated
and the Alarm Ring signal terminated.
Door Bell—a unique Door Bell Ring (single tone burst) may be
received each time the external contact is activated. A system
contact also can be assigned to act as a Door Open contact.
NOTE—Contacts 3 & 4 are only available in the iPECS-300,
600 and 1200.
When AC power to the system fails, back-up operation may be
provided with back-up batteries or Power Fail Transfer (PFT).
When battery back-up is provided the station will operate
normally. When PFT is implemented, an SLT is connected to a
CO line by the system. This SLT can be used as any normal
SLT, providing service while power is out.
The integrated Voice Mail modules incorporate several Voice
Memos to provide Station Users with general information such
as station number, date, time, and feature status. Voice Memos
are heard over the iPECS Phone speaker and over the handset
for SLTs.
For the Station Status Memo, the following items are reported:
ICM Signaling Mode (Handsfree/Tone/Privacy)
Station IP Address
Station Mac Address
Number of messages x (x: number of all message waiting)
Wake-Up Time (hh:mm)
Do Not Disturb
Forwarded to station xxx
Forwarded to speed bin xxx
Queued CO/IP line xxx