6.3
Broker Call: Switching between two calls
To switch between two calls (Broker Call):
Press the desired CO/IP line button.
6.4
Joining Multiple People in a Conference
To establish a Conference:
Establish call with one of the desired conference parties,
Select the Conf button,
Establish call with the other conference party,
Select the Conf button,
Repeat above for additional parties
Select the Conf button again to establish the conference.
To establish a Conference:
Establish call with one of the desired conference parties,
Select the Conf button,
Establish call with the other conference party,
Select the Conf button,
Repeat above for additional parties
Select the Conf button again to establish the conference.
6.4.1
You may switch between the active call and a call on Hold,
placing the active call on Hold acting as a broker between two or
more parties (Broker Call). iPECS Phone users may ‗broker'
for multiple calls up to the number of CO/IP line buttons.
You can establish a Conference with up to 3 parties, or 24
parties when using a Multi-Party Conference Interface Module
(MCIM). The other parties in the Conference may be internal or
external.
A Conference can be placed on Hold and is subject to Hold
Recall.
You may also use the Conference operation to join 2 external
parties in a private conversation.
Conference, which is not subject to the normal Hold Recall
operation.
Setting up a Conference Room
This is an Unsupervised