Using A Serial Dss - LG-Ericsson iPECS LIP-8050V User Manual

To use the Speakerphone to answer or place a call:

Press
the speaker and the microphone.
To control the volume of the Speakerphone or handset:
 Press the VOL▲ VOL▼ button.
3.2

Using a Serial DSS

With Auto Speaker Select, activating or accessing a feature by
pressing its button will activate the Speakerphone automatically.
When using a Headset, the
ON/OFF-hook state for the phone.
, the phone goes off-hook and sends audio to
SPEAKER
The LIP-8012DSS, LIP-8012LSS, and LIP-8048DSS can be
connected with the LIP-8050V using the RS-232 cable. Be sure
to verify the serial DSS and LSS capacities with the iPECS
System to ensure usability (refer to iPECS Manual). The
following graphics show the front and rear view of each.
NOTE—A Linked Pair slave station cannot use a serial DSS.
button controls the
SPEAKER